After the positive news about the Russia-Ukraine negotiations, the market risk aversion plunged. International oil prices fell back on The 29th after a straight drive on the 28th, and precious metals also continued to fall. China's domestic futures market was stable for the time being. By the end of The 30th, Shanghai gold main contract closed down 0.59%, Shanghai silver main contract closed down 1.46%. The main contract was up 0.77 percent at 690.7 yuan per barrel in late trading.
Back in international markets overnight, WTI crude oil futures briefly fell below $100 / BBL, while Brent crude hit its lowest intraday level in nearly two weeks. Spot gold briefly fell below $1,900 an ounce. COMEX gold futures closed down 1.1 percent at $1,918.4 an ounce. COMEX silver futures closed down 1.14 percent at $24.91 an ounce. "Crude oil prices have been extremely sensitive to changes in geopolitical news recently." Traders believe that the current oil price is still in a wide range of shocks, the situation in Ukraine to bring the premium is still in, although the market has a further decline in the drive, but should not be too bearish, recommended to wait and see for the time being. The Ukraine premium is still there, and there will be some volatility in the natural graphite market.
According to the above analysis and discussion, the author believes that when using natural graphite as raw material to develop artificial graphite, the following issues need to be paid attention to in terms of technology:
Surface modification of natural graphite. Compared with carbonaceous materials such as petroleum coke and pitch coke, natural graphite has fewer oxygen-containing functional groups on the surface, lower activity, and poorer binding force than coal tar pitch.
Therefore, with natural graphite, especially natural flake graphite as the main raw material, the carbon graphite products prepared according to the artificial graphite production process inevitably have the problem of poor mechanical properties. Appropriate surface treatment of natural graphite is required to increase the content of oxygen-containing functional groups on its surface.
Purification of natural graphite. The purity of carbonaceous raw materials such as petroleum coke and pitch coke is relatively high, and the ash content is usually less than 0.5%, while the purity of natural graphite treated by flotation is relatively low, and the carbon content is usually below 90%.
Therefore, carbon graphite products prepared from natural graphite are often limited in their application fields due to their low purity and poor comprehensive performance. High purification treatment of natural graphite is one of the ways to solve this problem.
The cost of chemical purification is low, but the water consumption in the washing process is large and the pollution is large, while high-temperature purification has the problem of high cost. Some people also think that block graphite can be prepared according to the production process of artificial graphite, and then subjected to high-temperature heat treatment above 2500 ℃.
While the "carbon" phase is graphitized, the impurities in the natural graphite phase are removed, but firstly, the production cost is increased, and secondly, the defects formed after the gasification of impurities often cause the performance of the product to decline.
The particle size of natural graphite. To improve process performance and product performance, in addition to fine-structure carbon-graphite products, most carbon-graphite products need to use different grades of carbonaceous raw materials in the batching process. For some large-sized products, the particle size of carbonaceous raw materials even reaches The flotation-treated natural graphite is often in the form of a fine powder, and the particle size is only tens to hundreds of microns. Therefore, the use of natural graphite as a raw material is limited to the preparation of fine-structure carbon graphite products.
Although natural microcrystalline graphite with different particle sizes can be obtained, due to its low purity and high cost of high-temperature purification, there is no report on the preparation of coarse-structure carbon graphite products using natural microcrystalline graphite as raw material. To solve the problem of the lack of large particles of natural graphite, it is recommended to use the "secondary coke" process in the treatment of carbon black raw materials in the artificial graphite industry.
Volume shrinkage during preparation. In the preparation process of artificial graphite, especially in the graphitization process, since the arrangement of carbon atoms gradually changes to a regular graphite structure, the volume shrinkage of the product is relatively large.
The advantage of this volume shrinkage is that it can increase the density of the product, but when the shrinkage is uneven, it is easy to cause the product to crack. When natural graphite is used as raw material, the density and mechanical properties of the product are lower due to the smaller volume shrinkage during carbonization and graphitization.
In addition, when developing artificial graphite with natural graphite as raw material, it is also necessary to consider the issue of comprehensive production cost.
Since the price of flotation natural graphite is similar to that of calcined petroleum coke and pitch coke, and then purified to a carbon content of 98%, the price of natural graphite is nearly twice that of calcined petroleum coke and pitch coke. In addition to the above-mentioned several carbon graphite products that have formed a large industry, the proposal of most technical routes and technical measures will greatly increase the production cost.
High quality graphite manufacturer
Luoyang Moon & Star New Energy Technology Co., LTD, founded on October 17, 2008, is a high-tech enterprise committed to the research and development, production, processing, sales and technical services of lithium ion battery anode materials. After more than 10 years of development, the company has gradually developed into a diversified product structure with natural graphite, artificial graphite, composite graphite, intermediate phase and other negative materials (silicon carbon materials, etc.). The products are widely used in high-end lithium ion digital, power and energy storage batteries.
If you are looking for graphite or lithium battery anode material, click on the needed products and send us an inquiry：email@example.com
In 2021, Russia's palladium, nickel and aluminum exports will account for 24.6%, 21.9% and 9.9% of the global total, respectively. Russia exported 2.819 million tons of palladium, accounting for 43.37% of global production. Platinum exports amounted to 962,000 tons, accounting for 15.01% of global production. Russia controls 10 per cent of the world's copper reserves. Russia and Ukraine are also important producers and exporters of neon gas. Markets were volatile after the russia-Ukraine conflict. As of March 28, the London Metal Exchange (LME) nickel, aluminum and copper prices rose 75.3 percent, 28.3 percent and 4.9 percent respectively from the end of last year, thus driving up costs for downstream companies such as electronics, auto parts, military and aerospace. If you are looking for a natural graphite with low price fluctuation range and excellent quality, click here will be a good choice.
Is boron amorphous or crystalline?Boron can be prepared in several crystalline and amorphous forms. The well-known forms of crystallization are α-rhombohedral (α-R), β-rhombohedral (β-R) and β-tetragonal (β-T). In spec…
What is copper oxide?Copper oxide is an inorganic substance. Copper oxide chemical formula is CuO. It is a black oxide of copper. Slightly bisexual and slightly hygroscopic. Insoluble in water and ethanol, easily soluble in acid, thermally stable, de…
What is the use of aluminum oxide?Medical professionBecause of its hardness, bioinertia and chemical properties, alumina is the preferred material for hip replacement bearings, such as prosthetics, bionic implants, prosthetic eye substitutes, tissue…