Introduction to Titanium Carbide TiC Powder

A Brief Introduction Titanium Carbide TiC Powder

Titanium carbide also known as TiC is a standard transition metal carbide with NaCl-type cubic crystal structure, high melting point, high hardness and high Young's molecular, excellent quality chemical stability, excellent wear as well as corrosion resistant and high electrical conductivity and thermal conductivity. Thus, it is able to be used in an extensive range of applications with great potential for cutting tools parts, aerospace components and protective coatings against wear, foams, and infrared radiation ceramics materials.

The applications for Titanium Carbide TiC Powder

1. The multiphase materials are used to make different materials

Titanium carbide ceramics belong to super hard tool materials, TiC and TiN along with WC, A12O and other raw material made of various multiphase ceramic materials, these materials have a high melting point, a high hardness and excellent chemical stability. It is the most preferred material for cutting tools, wear-resistant components however, they are extremely electrically conductive and are the most popular material for electrodes.

Cutting tool material: Because of an % of TiC hard particle dispersion within the matrix, composite cutting tools do not only improve the toughness however, to a certain extent, improve crack toughness, which is greater than the natural tool cutting performance a lot. A12o3-tic ceramics can serve as armor materials. As a material for tools, the hardness is greater than (C, N) and Ti(C N, C) due to N. To create it for steel and other cutting materials, the friction coefficient much lower. This material has numerous advantages for cutting. Through the combination of the advantages of Ti and (C N, C) to form multiphase clays, a highly effective tool material can be prepared.

2. It is used to coat materials.

Diamond coating: This manufacturing technique used to make diamond tools is typically the impregnation of powder metal using the method. Due to the high interfacial energy between diamond and more general metallic or alloy, the diamond surface cannot be permeated by alloys or metals with a melting point of low and its bonding performance is not great. Recently, many scholars have conducted a lot of studies to improve the strength of bonds between metal and diamond. The method that is active is the most well-known method and involves adding an amount of titanium in the bond of metal, vanadium, chromium and others that are active, and tool for sintering liquid phase and the active metal is high carbon compound forms elements, and the diamond affinity is large, allowing for improve the surface of diamond in order to create the metallurgical interaction of metal bond and diamond. However, the strength of an interface is determined by the amount of active metal, sintering temperature in addition to other parameters. It requires an extrusion of the binder to enhance the activity of the metal at the interface because this method is not suitable for the hot pressing Sintering of diamonds and metal powder in a fast solid phase.

3. Used to prepare foam ceramics

As a filter, foam ceramics can effectively remove inclusions throughout all types of fluids and their filtration method is Adsorption and agitation. The filter must be chemically stability of the material, especially in the industry of metallurgical with a high melting filter, so this type materials will oxide generally, and also adapts to the filtering of metal melt, which is the primary goal that is thermal shock resistance. Titanium carbide foams have higher strength, toughness, electrical conductivity, plus corrosion and heat resistance more than oxide-based foam ceramics.

4. Ceramics used in infrared radiation materials

Titanium carbonide is a sort of intermetallic material, typically exhibits good chemical stability, that is, there is no change in valence or valence state. The system is subject to high temperature reduction of the preparation of specimens, the titanium ions show a delay effect to manifest, and are aimed at the solid of titanium ions melting into the structure of the cordierite location, and changes in the structure. When compared with a single substance that is a single material, the radiation capability of the compound near 3tma is obvious improvement, which is good for application in the field of high temperature.

Main supplier of Titanium Carbide TiC Powder

We are a reliable chemical material supplier in the world and a manufacturer with over 12 years' experience providing premium chemicals and Nanomaterials like silicon powder, nitride powder, the graphite-based powder zinc sulfide, calcium nitrideand 3D printing powder, etc.

If you are looking for high-end titanium carbide TiC Coating If you are interested, feel free to contact us and send an inquiry. (brad@ihpa.net)

Inquiry us