Home > Business > Features, Part Name, and Marking of the bearing services

Features, Part Name, and Marking of the bearing services

wallpapers Business 2021-10-14 >

Features, Part Name, and Marking of the bearing services

The bearing services used in a rolling mill is limited in its dimensions by the roll neck diameter and minimum roll diameter. The bearing services is so designed that its load rating may be as large as possible within this limited space. This type of bearing consists of two sets of cone assemblies, three cups, and two cup spacers. To facilitate installation and removal of the roll and chock, this type of bearing is loose-fitted to the roll neck. Accordingly, lubrication to the fit surface is essential to prevent scoring between the roll neck and bearing bore due to creep. To prevent wear and seizure of cone and cone spacer, oil slots are provided on one side of the cone and both sides of the cone spacer. Double-row cups and cup spacers are provided with oil holes and oil grooves to supply the lubricant.

The bearing services combines the traditional cylindrical roller bearing and spherical roller bearing configurations. Its proprietary outer race and roller profiles plus a cylindrical inner ring combine the key attributes of both bearing types. This unique three-point contact design geometry provides simultaneous misalignment and axial displacement performance, optimizes contact stress distribution, and helps promote roller stability. The result is a more dynamic, more reliable bearing.

The bearing services consists of an inner ring, outer ring, and roller/retainer assembly. The separable components simplify installation, removal, and inspection. The retainer holds the rollers in position, creating a single assembly that prevents the rollers from being damaged during mounting and dismounting. The inner ring and outer ring can be installed in either direction, helping to avoid common mounting errors. No special tooling is required. Three-quarter angle view of the three main ADAPT bearing components on a white background – inner race, cage and rollers, and the outer race.

For more information about the bearing services, Welcome to contact us via [email protected].

The features of the bearing services

Hair cracks caused in the cone side surfaces by creep may lead to cracks in the cone. To prevent such cracking and to enhance the shock resistance of the bearing services, the bearing services rings are made from carburized steel usually. The cage is designed as a window type or pin type.

In addition to the bearing number, the bearing services is provided with a serial number that is common to one set of bearings and matching symbols indicating the combination order. The serial number is used to prevent mismatching during the combination of bearings while matching symbols show the proper position of each part within a bearing. A wrong combination of these parts may cause an excessively small bearing clearance, resulting in a seizure. On the other hand, an excessively large clearance due to a wrong combination may cause a reduction of the load zone resulting in shorter fatigue life.

The cup of the bearing services is provided with load position numbers at four equally divided points around the circumference.  (These numbers are provided on the cone if the cup rotates.) So that the bearing services life can be extended, each time the bearing is reassembled after disassembly and cleaning, shift the load position numbers by 90 to change the load zone.

The bearing services have seals positioned at both end surfaces and the middle bore notch. Basically, this type of bearing is similar to the four-row tapered roller bearing and has the following features:

1. Substantial reduction in the consumption of lubricating grease.

2. Longer interval until disassembly and cleaning, thereby cutting down on the maintenance costs )

3. Cleaner environment around the rolling mill and roll shop )

4. Prevention of sudden failure due to foreign particle entry )

5. Longer bearing life is achieved by preventing water intrusion )

6. Load capacity remains just as high as that of four-row tapered roller bearings without seals

Basically, there are two-seal and four-seal types of the bearing services. The standard feature of the sealed-clean tapered roller bearing is its ability to operate for a long time without the need for regreasing. Due to this feature, there are no oil holes in the cup spacers to supply lubrication to the bearing, but in the case of severe operating conditions, it could be designed to enable lubrication by making a lubrication groove and oil holes in the cup spacers. There is also a type compatible with oil-air lubrication.

In addition to the bearing numbers, the bearing services is provided with a serial number that is common to one set of bearings and matching symbols indicating the combination order. The serial number is used to prevent mismatching during the combination of bearings while matching symbols show the proper position of each part within a bearing. A wrong combination of these parts may cause an excessively small bearing clearance, resulting in a seizure. On the other hand, an excessively large clearance due to a wrong combination may cause a reduction of the load zone, resulting in shorter fatigue life. The cup of a bearing is provided with load position numbers at four equally divided points around the circumference. (These numbers are provided on the cone when the cup rotates.) So that the bearing services life can be extended, each time the bearing is reassembled after disassembly and cleaning, be sure to shift the load position numbers by 90° to change the load zone.

The bearing services supplier

Luoyang FV generally uses TIMKEN3311 for steel mill customers, which is also a kind of carburized steel and is often used as a rolling mill bearing material by well-known steel mills at home and abroad.

FV bearing is a professional manufacturer of heavy industry bearings. FV bearing devotes to the research and manufacture of metallurgy, mining, wind power, and cement bearings, and has earned a high reputation in many areas overseas, especially its rolling mill bearing, some of which can perfectly replace famous brand bearings. So far, FV bearing\'s superior products have included cylindrical roller bearings, tapered roller bearings, spherical roller bearings, ball bearings, and slewing bearings. Combining customers\' actual applications, FV bearing provides customers with bearings comparable to the well-known brand bearings and high-quality solutions. Welcome to contact us via [email protected] if you have any needs.

 


Say something
  • All comments(0)
    No comment yet. Please say something!
Tag:
Next: No Page